View previous topic :: View next topic |
Author |
Message |
Brother 9 Guest
|
Posted: Wed Aug 10, 2005 5:15 pm Post subject: |
|
|
I just wanted to add something, being the kind of guy who took years and years of college and graduate school logic, and who grew up in the restaurants of my father and grandfather (both chefs). I'm not an engineer by trade but I sure think like one.
PLEASE people, PLEASE do not under any circumstances scrape things off the cutting board with your knife blade. Use the back of the knife. Depending on how often you do something like this you can get another couple of months between sharpenings if you just take care of the blade.
It's the small things that pit and destroy your knife. The edge is why you have the knife, do everything you can to protect it. |
|
Back to top |
|
|
Michael Chu
Joined: 10 May 2005 Posts: 1654 Location: Austin, TX (USA)
|
Posted: Wed Aug 10, 2005 5:16 pm Post subject: |
|
|
re: scraping off your board
I recommend investing a couple of dollars in a metal board scraper (or bench scraper or bash & chomp or dough cutter or dough blade). Excellent for scraping stuff up off the board and it doesn't have a sharp edge threatening to hurt you as you carry food to the pot or bowl. Also bashes garlic, cuts pastry dough and a acts as a ruler. |
|
Back to top |
|
|
Screwtape Guest
|
Posted: Wed Aug 10, 2005 5:18 pm Post subject: |
|
|
I am very impressed with your site and look forward to trying some of your recipes. I wish I had found it prior to buying my knife set at Dillards. It is ok, but I suspect that I could have done much better. Next time I guess. |
|
Back to top |
|
|
cynicalb_repost Guest
|
Posted: Wed Aug 10, 2005 5:19 pm Post subject: |
|
|
I have used stamped knives forever, but have started going to forged, and will never go back. If you want worry-free knives, stainless steel by any of the major brands are the way to go. But if you don't mind doing a little extra work, and want to have absolutely the best knives that you can, I have two recommendations - learn how to sharpen your knives with sharpening stones and a steel, and buy forged carbon steel knives. You can get carbon steel knives literally razor sharp with little effort, the downside being that they will stain and require more care. I would recommend Sabatier 4 Star Elephant from France. I have recently purchased some, both new and vintage, and am completely satisfied. If you keep your eyes open, and know what you are looking for, you can pick them up at estate sales or resale shops or Ebay at relatively fair prices. |
|
Back to top |
|
|
an anonymous reader Guest
|
Posted: Wed Aug 10, 2005 5:20 pm Post subject: |
|
|
One word: Cutco
They really are the best cutlery in the world.
Chicago Cutlery: Made in China, if you have any look and see
Henkel's: Only second best
Cutco produts are hand made in the United States. This means they may cost a little more, but you get what you pay for. They're made of surgical grade steel. They have full tang handles. The Double D edge means they'l never need sharpening.
The handles are not only ergonomic (so well designed to fit the hand that even handicapped people who can't normally use a knife can use these), but they are beautiful as well. The Cutco Homemaker set is on display in the National Museum of Modern Art in New York City.
On top of that they have the forever garuntee. Not "lifetime" or "lifetime of the owner." Forever; as long as the company still exists. Even if the knives are damaged from missuse (ie; opening paint cans) the company will replace the knife at no cost. One woman's house burned down with her homemaker set inside, and the company replaced the entire set.
I'm not just saying this to sell them. I used to, but I absolutely hated the job. But, I still love the knives and regularly use mine. I was well educated during my training and these really are the best knives in the world. |
|
Back to top |
|
|
an anonymous reader Guest
|
Posted: Wed Aug 10, 2005 5:20 pm Post subject: |
|
|
Re: Sharpening
Personally, I use a two sided ceramic sharpener (Spyderco's Double Stuff) and a steel hone. But, I find sharpening relaxing, and doing it that way takes at least a half hour.
For the best quick edge, on straight or serrated, Spyderco makes a set of oval crock sticks - Model Galley V. They are 12"long, enough to sharpen just about any knife, and easy: just pull down, one stroke on one side, one oh the other. About a dozen strokes and it's wicked sharp.
If you can find a set, well worth the purchase.
-Rich |
|
Back to top |
|
|
cynicalb_repost Guest
|
Posted: Wed Aug 10, 2005 5:21 pm Post subject: |
|
|
Regarding which knives you need - I recommend NOT buying sets. You'll end up with a lot of stuff that you never use. Better to pay for quality knives, and fewer of them, than to get a set of 12-16 knives and you only use 3-4 all the time. I would recommend a 3 1/2" paring knife, a 6" utility (sometimes called sandwich) or boning knife, an 8" and 12" chef's knife, and a 12" steel. With these four you will be able to tackle virtually any chopping or slicing task. If you stick with high quality forged knives, like Wusthof Classic, Sabatier 4 Star, Lamson, Henckels 4 Star, etc. brand new you'll spend less than $200, and if you can find them used or on discount, probably around $100 - $150. As you become more proficient and want to spend more money, I would go for a 10" slicing knife, a fillet knife, the boning knife if you didn't get it earlier, and a cleaver. |
|
Back to top |
|
|
Megpie Guest
|
Posted: Wed Aug 10, 2005 5:21 pm Post subject: |
|
|
I have 2 types of knives currently, henckels international, and Messermeister. The henckels set with a Christmas gift from my mother. The knives are absolutely wonderful, but a little small for my taste. I need at least an 8 inch chef's knife to be happy. The Messermeister is the set supplied by my school (I'm in culinary school). For graduation, I'm trying to talk my mom in to getting me a set of shun. These knives are beautiful, have a great feel, and work well.
As far as sharpening goes, I prefer to get mine done professionally. They know what they're doing, and if you sharpen too often you won't have much of a knife left after a while. Hone your knives every day you use them. |
|
Back to top |
|
|
an anonymous reader Guest
|
|
Back to top |
|
|
an anonymous reader Guest
|
Posted: Wed Aug 10, 2005 5:23 pm Post subject: |
|
|
I would recommend the knives from Japan Woodworker (www.japanwoodworker.com). I bought one of the Tosagata Santoku knives and it is one of the sharpest things I've ever used. At $27.15 for a 6" santoku, it's quite a steal. It isn't the greatest finish, but then again I like the handmade feel that it has, including the unfinished handle. I'd take it any day over my Henckels or Wusthof.
As a side note, any woodworkers out there would be wise to check out their selection of woodworking tools as well. Japanese chisels are oh so sharp. |
|
Back to top |
|
|
an anonymous reader Guest
|
|
Back to top |
|
|
an anonymous reader Guest
|
Posted: Wed Aug 10, 2005 5:24 pm Post subject: |
|
|
Excellent article, just what i needed. we're vegetarians, and i don't need all the functionality of the chef's knife. so the santoku is what i'm going to get, based on the recommendations at the bottom of the article! thanks again! |
|
Back to top |
|
|
R J Keefe_repost Guest
|
Posted: Wed Aug 10, 2005 5:24 pm Post subject: |
|
|
Congratulations on the "Bloggie"!
Regarding bread knives, I find that they're also great for sawing at some frozen items, such as the block of mirepoix that I keep in the freezer. |
|
Back to top |
|
|
an anonymous reader Guest
|
Posted: Wed Aug 10, 2005 5:25 pm Post subject: |
|
|
Re: cutco comments, nice to see they're still up to their same old brainwashing tricks. cut those pennies salesmen! |
|
Back to top |
|
|
an anonymous reader Guest
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You can delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|