View previous topic :: View next topic |
Author |
Message |
chiefkid Guest
|
Posted: Sat Aug 26, 2006 1:32 pm Post subject: Oil for Cutting Boards |
|
|
If I can't oil my cutting boards with mineral oil, does anyone have any other suggestions ? Eg peanut oil, coconut oil, sesame oil or any other ?
Does anyone actually have any experience of oiling with cooking oil and having it go rancid ? I thought that in theory oil can only go rancid when it is heated to past a certain temperature (different for different oils) and the molecules start to break down. I assume in practice no one actually heats the cutting board so this should not be an issue - or is my science all wrong ? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Howard
Joined: 21 Nov 2005 Posts: 64
|
Posted: Sun Aug 27, 2006 12:34 am Post subject: |
|
|
No, oils can go rancid at room temperature. I believe oxidation is the primary cause of rancidity. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
GaryProtein
Joined: 26 Oct 2005 Posts: 535
|
Posted: Tue Aug 29, 2006 1:58 am Post subject: |
|
|
You MUST ONLY use mineral oil. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Guest
|
Posted: Thu Oct 11, 2007 8:35 pm Post subject: oils for cutting boards |
|
|
Try walnut oil. It hardens when exposed to air and does not go rancid |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Guest
|
Posted: Sat Oct 13, 2007 2:50 am Post subject: |
|
|
Mineral/beeswax Add beeswax shavings to mineral oil and microwave for a minute or so depending on quantity. The wax stays in solution. Also use this solution foir long term storage of carbon steel blades.
Buzz |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The BoardSMITH
Joined: 14 May 2008 Posts: 8 Location: High Point, NC
|
Posted: Wed May 14, 2008 12:13 pm Post subject: Oil for Cutting Boards |
|
|
Stick with an inert oil like mineral oil. It adds nothing to the taste, will not turn rancid, is fairly inexpensive, is easy to find at your local drug or grocery store and is an effective coating. All organic oils will oxidize over a period of time causing the board to become unusable and dangerous. Some nut oils can cause an allergic reaction to those who are allergic to nuts.
Adding bees wax to mineral oil is easy. Shave some wax into the oil and heat in a double boiler. Microwaves are virtually useless here. Heat until the mixture reaches the color of apple juice, apply to a clean, dry wood surface, spread out, allow to soak then buff off with a clean towel when the oil doesn't soak any further. This is also an effective treatment for all wooden utensils like spoons, spatulas etc.....
Don't want to use mineral oil.....Use melted bees wax instead. A little more difficult but this will provide a good water resistant coating to your board without using mineral oil.
Or, you can use nothing and do like the old time butchers did. When they stopped working for the day, they scraped their blocks and applied a coating of salt overnight. The salt absorbed the moisture in the wood, killed the bacteria and sanitized the surface. The next moring they swept the salt off and started to work. I watched my Uncle do this, he was a butcher. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
gfairbairn
Joined: 07 Jan 2008 Posts: 31 Location: http://athenafoods.com/
|
Posted: Thu May 15, 2008 3:34 pm Post subject: |
|
|
Grapeseed Oil |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The BoardSMITH
Joined: 14 May 2008 Posts: 8 Location: High Point, NC
|
Posted: Thu May 15, 2008 8:07 pm Post subject: |
|
|
If you use ANY kind of organic oils, they will turn rancid. This includes grapeseed. Take a chance with your own health and don't take chances with anyone elses health by recommending an organic oil. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DrBiggles
Joined: 12 May 2005 Posts: 356 Location: Richmond, CA
|
Posted: Fri May 16, 2008 3:22 am Post subject: |
|
|
The BoardSMITH wrote: | If you use ANY kind of organic oils, they will turn rancid. This includes grapeseed. Take a chance with your own health and don't take chances with anyone elses health by recommending an organic oil. |
Hey B Smith,
Wanted to stop by and thankee for the words. Huge fan of the wood, no plastic here, none in the family far back as '46. Here's my daily users up against the wall, under the phone. Champion Juicer poking out there on the right with a few cast iron pans there. Those black pans hard to illuminate.
There's only a few of note, the huge teak one on the left, in the back. And the maple handled one on the right. I found that attached to an older portable dishwasher and unscrewed the sucker. It broke in half, but use it for taking to parties when cooking for crowds.
Biggles |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Guest
|
Posted: Thu Jun 19, 2008 2:27 am Post subject: Re: Oil for Cutting Boards |
|
|
chiefkid wrote: | If I can't oil my cutting boards with mineral oil? |
Why can't you use mineral oil? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
paulr Guest
|
Posted: Mon Aug 18, 2008 6:55 pm Post subject: rancidity |
|
|
Just to clarify a couple of things: rancid oil is not a health hazard. rancidity comes from the oxidation of unsaturated fats. It causes off-odors and flavors, but has nothing to do with microbial spoilage.
Some details can be found here: http://www.oliveoilsource.com/olive_oil_storage.htm
Also, I dispute the idea that olive oil or vegetable oils will rancidify in a cutting board. I have been using food grade oils on my three cutting boards for over 15 years. Mostly cheap olive oil, because I always have a lot of it around. Not only have I never smelled any rancidity, but after the oil soaks in I don't even smell the olive oil. I just get the faint smell of maple.
Disclaimer: all the boards I currently use are edge grain. A friend suggested to me that end grain boards (like the ones the Boardsmith makes) drink up much more oil, so rancidity could be in an issue with those. I can't comment from experience. But you don't have to worry about anyone's health.
By the way I have one of his boards on order; they're beautiful. If you get one, you might as well maintain it the way he tells you! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
GaryProtein
Joined: 26 Oct 2005 Posts: 535
|
Posted: Tue Aug 19, 2008 4:51 am Post subject: |
|
|
Even after reading the above link, all I can say about rancid oils is YUCK! Who wants rancid oils on a cutting board even if it safe from microbes. It smells and tastes lousy. It is so simple to just use mineral oil which is cheap and so readily available that even the thought to use a vegetable oil with all its problems totally escapes me. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
IndyRob
Joined: 17 Dec 2006 Posts: 77
|
Posted: Thu Aug 21, 2008 9:05 pm Post subject: |
|
|
I've used olive oil on my butcher block countertop (edge-grain again) for maybe six years now and have never detected any note of rancidity whatsoever. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Zig Guest
|
Posted: Sun Sep 14, 2008 1:43 am Post subject: Block Oil |
|
|
Yes, I have the answer to this one. You can buy the "Block Oil" for Wood and Bamboo sold by Homewood / Block Bros., San Anselmo California.
Website: www.home-wood.com
Ingredients: Refined Seed Oil, Lemon Oil, Vitamin E, Carotene |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JDR
Joined: 17 Sep 2008 Posts: 8
|
Posted: Wed Sep 24, 2008 2:46 am Post subject: Nut oils |
|
|
With peanut allergy becoming so common I would think that using peanut oil could be very dangerous to some people, regardless of the rancidity issue. The school district here does not allow students to even bring peanut butter sandwiches to school for lunch. Some people are so sensitive that merely breathing on them after eating peanut butter, or peanuts, is enough to cause a bad reaction. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|