View previous topic :: View next topic |
Author |
Message |
pbone
Joined: 05 Jan 2008 Posts: 99 Location: Dutchess County, NYS
|
Posted: Sat Mar 29, 2008 4:23 pm Post subject: meat thermometer properly calibrated |
|
|
Hello, possums and other darling creatures...can anyone suggest a really good meat thermometer I might buy online that allows one to measure a "rare" temperature in Farenheit? My meat thermometer is relatively new, but the old-fashioned design, with a round dial on the head and a pointed spindle to poke into the roast, but the lowest temperature on the dial is 140 degrees! I think this limitation must have come about at the time a few years ago when the government of NJ said no more sunny side up or soft-yolked eggs could be served in restaurants due to possibility of salmonella. As rare meat might be ideally be as low as 125 or 130, and especially as meat continues to cook while it's resting, my meat thermometer is useless. Any affordable suggestions? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Dilbert
Joined: 19 Oct 2007 Posts: 1304 Location: central PA
|
Posted: Sat Mar 29, 2008 5:00 pm Post subject: |
|
|
...lowest temp is 140'F
oh fudge. that won't do for meat roasting.
there's a couple kazillion styles/brands of "instant read" thermometers on the market - available in any supermarket and/or kitchen doo-dad store.
I personally don't have any of those, so I'm useless for a recommendation other than:
I have a Weston dial thermometer model 2261 which goes from 0 to 220'F
has a big 8-9 inch long probe. stainless, no rust, no musst, no fusst.
stick it in, read the dial (glasses not included . . . )
it's labeled "Made in USA" - not China, so it's probably an obsolete model number |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DrBiggles
Joined: 12 May 2005 Posts: 356 Location: Richmond, CA
|
Posted: Sat Mar 29, 2008 7:04 pm Post subject: Re: meat thermometer properly calibrated |
|
|
susan pettibone wrote: | Hello, possums and other darling creatures...can anyone suggest a really good meat thermometer I might buy online that allows one to measure a "rare" temperature in Farenheit? My meat thermometer is relatively new, but the old-fashioned design, with a round dial on the head and a pointed spindle to poke into the roast, but the lowest temperature on the dial is 140 degrees! I think this limitation must have come about at the time a few years ago when the government of NJ said no more sunny side up or soft-yolked eggs could be served in restaurants due to possibility of salmonella. As rare meat might be ideally be as low as 125 or 130, and especially as meat continues to cook while it's resting, my meat thermometer is useless. Any affordable suggestions? |
I've been through dozens over the years and finally bought a Thermapen 3 or 4 years ago. It'll measure from -50 F to 572 F within 4 seconds. It comes with a certificate of accuracy, I'll never be without mine.
Biggles |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
pbone
Joined: 05 Jan 2008 Posts: 99 Location: Dutchess County, NYS
|
Posted: Sat Mar 29, 2008 7:56 pm Post subject: |
|
|
I just forked over $99 (eeek) for a Thermapen like Biggles has. As it has such a great range of temps, could I use it when making English toffee? Won't it serve as a candy thermometer or to measure how cold something is that you're waiting to get to "room temp"?[/code] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
GaryProtein
Joined: 26 Oct 2005 Posts: 535
|
Posted: Sun Mar 30, 2008 3:07 am Post subject: |
|
|
Susan, you will love the Thermapen. Now all you need is a Fluke infra-red thermometer and you wil be set. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Michael Chu
Joined: 10 May 2005 Posts: 1654 Location: Austin, TX (USA)
|
Posted: Sun Mar 30, 2008 7:51 am Post subject: |
|
|
I use my Thermapen for everything - toffee making, spot checking deep frying oil temp, roast temp, water temp, everything... Tina used it recently for soapmaking... |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
danicamoore
![](images/avatars/10799397834ab10839ba392.jpg)
Joined: 16 Sep 2009 Posts: 58 Location: Illinois
|
Posted: Sat Oct 24, 2009 3:10 am Post subject: |
|
|
actually you could search it thru web. you can find it there the most and worst meat thermometer from there you can compare. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
pbone
Joined: 05 Jan 2008 Posts: 99 Location: Dutchess County, NYS
|
Posted: Sat Oct 24, 2009 3:59 am Post subject: @ |
|
|
HEY!!!!! I've had my Thermapen for a year now, and I need to chime in here that although it cost the earth (close to a C note) I bought two, one for me and one for my adorable daughter in law and son for their anniversary...I LOVE it. It is accurate, easy, it has a tremendous range of temps, it is perfection, state of the art. Funnily enough, I just got an email from Thermapen, and they are having a sale. Seems like they're selling them now for about $65...I think. Anyway, My advice is: GET ONE. That's my first advice. My second advice is: When these brill engineers address a question you have, TAKE THEIR ADVICE. Biggles? Chu? The other guy whose name I've forgot? Never steered me wrong. Incredibly helpful, and very responsive! Relax, take a deep breath and spend the dough on a Thermapen. You won't be disappointed. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
pbone
Joined: 05 Jan 2008 Posts: 99 Location: Dutchess County, NYS
|
Posted: Sat Oct 24, 2009 4:02 am Post subject: |
|
|
Sorry, Protein. How could I forget your name? Happy Halloween, and thanks for all your help.))))) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|